Sunroof System (Service Information): Sunshade: Installation

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM".
For installation of the cover assembly stereo camera, refer to "INSTALLATION", "Stereo Camera" in the "EyeSight" information and observe the precautions for installation. Refer to EyeSight>Stereo Camera>INSTALLATION .

Install the shade assembly.
Install the drain holder.
Install the bracket sunroof bolts, the brace COMPL center LWR and the rail assembly.
Tightening torque:

Refer to "COMPONENT" of "General Description" for the tightening torque. Refer to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>General Description>COMPONENT .
Install the bolt which secures the curtain airbag module.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Connect the harness connector of the tube drain and the motor assembly.
CAUTION: Insert the drain tube until it contacts all the way to the end of drain pipe (a).

Courtesy of SUBARU OF AMERICA, INC.
Install the trim panel sub assembly. Refer to EXTERIOR/INTERIOR TRIM>Roof Trim>INSTALLATION .
Install the lid assembly. Refer to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>Glass Lid>INSTALLATION .
Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .