LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Relay and Fuse >> Removal

Relay and Fuse: Removal

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work, Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver, Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the knee airbag module, Refer to AIRBAG SYSTEM>Knee Airbag Module>REMOVAL
  4. Remove the body integrated unit (fuse & relay box), Refer to BODY CONTROL/COMMUNICATION SYSTEM>Body Integrated Unit>REMOVAL .
  5. Remove the accessory relay.
    G13622400Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals