LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Rear Gate System (Service Information) >> Power Rear Gate Touch Sensor >> Installation

Power Rear Gate Touch Sensor: Installation

  1. Install the power rear gate touch sensor.
  2. Install the trim panel assembly rear gate. Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals