LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Rear Gate System (Service Information) >> Power Rear Gate Driver's Switch >> Removal

Power Rear Gate Driver's Switch: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Release the claws, and then remove the power rear gate driver's switch (a).
    G13625465Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals