LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Rear Gate System (Service Information) >> Power Rear Gate Auto Closer >> Installation

Power Rear Gate Auto Closer: Installation

  1. Install the power rear gate auto closer.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  2. Install the trim panel assembly rear gate. Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals