LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Trunk Lid Latch And Actuator Assembly >> Installation

Trunk Lid Latch And Actuator Assembly: Installation

  1. Install the lock assembly trunk lid.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the trim panel trunk lid. Refer to EXTERIOR/INTERIOR TRIM>Trunk Room Trim>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals