LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Remote Openers >> Installation >> Fuel Lid

Fuel Lid

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Install the saucer COMPL.
    NOTE: Securely install the rubber portion of the saucer COMPL to the fuel filler pipe assembly.
  2. Attach the ring clips.
    CAUTION: Do not reuse the ring clip and replace with a new part, because engagement of the claw weakens.
  3. Install the fuel filler pipe protector.
  4. Install the fuel filler cap.
  5. Install the flap outer.
  6. Install the lock assembly fuel.
  7. Install the trunk trim panel side. (Sedan model): Refer to EXTERIOR/INTERIOR TRIM>Trunk Room Trim>INSTALLATION .
  8. Install the trim panel assembly apron RH. (OUTBACK model): Refer to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>INSTALLATION .
  9. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals