LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Remote Openers >> Installation >> Front Hood Opener

Front Hood Opener

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Check the cable for deformation such as fray before installation.
  2. Install the cable assembly front hood.
    NOTE: Tie and pull the string attached to the body into the vehicle to install the cable clamp and hood cable assembly.
  3. Install the opener handle.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  4. Install the lock assembly front hood. Refer to SECURITY AND LOCKS>Front Hood Lock Assembly>INSTALLATION .
  5. Install the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>INSTALLATION .
  6. Install the mud guard front LH. Refer to EXTERIOR/INTERIOR TRIM>Mud Guard>INSTALLATION .
  7. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals