LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Rear Gate Opener Button >> Removal

Rear Gate Opener Button: Removal

NOTE: The switch opener rear gate of the model with keyless access with push button start is integrated with the rear lock button. For operation procedures, refer to SECURITY AND LOCKS>Rear Lock Button>REMOVAL .
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel assembly rear gate LWR. Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>REMOVAL .
  3. Remove the garnish assembly rear gate. Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>REMOVAL .
  4. Remove the garnish assembly rear gate LWR. Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>DISASSEMBLY .
  5. Press the lock portions on both sides and remove the switch opener rear gate.
    CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
    G13625722Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals