LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Front Hood Lock Assembly >> Adjustment

Front Hood Lock Assembly: Adjustment

  1. Remove the clips of the lock assembly front hood.
    NOTE: After adjusting the lock assembly front hood, dispose the clips since they are no longer needed.
    The clips cannot be inserted because the clip holes become smaller due to adjustment.
  2. Loosen the nut, and adjust the lock assembly front hood while moving it up and down.
    CAUTION: After adjustment, tighten the nut securely.
    NOTE: Check the clearance and surface level gap between front hood and bumper face. Refer to EXTERIOR BODY PANELS>Front Hood>ADJUSTMENT .

    Tightening torque: 

    33 N.m (3.4 kgf-m, 24.3 ft-lb)

    G13625733Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals