LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Headlight/FOGLIGHT (Diagnostics) >> Control Module I/O Signal >> Electrical Specification

Electrical Specification

G13203568Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard
(B78) No. 1 (+) ← → Chassis ground (-) Battery power supply Always 8 - 16 V
(B78) No. 2 (+) ← → Chassis ground (-) GND Always Less than 1 Ω
(B78) No. 3 (+) ← → Chassis ground (-) Ignition power supply Ignition switch ON 8 - 16 V
(B78) No. 4 - - -
(B78) No. 5 - - -
(B78) No. 6 ← → Chassis ground Leveling actuator power supply Ignition switch ON 8 - 16 V
(B78) No. 7 ← → Chassis ground Leveling actuator GND Always Less than 1 Ω
(B78) No. 8 - - -
(B78) No. 9 ← → Chassis ground Leveling actuator signal Headlight off → on Less than 1 V → 1.0 - 14.4 V (for 17 seconds)
Headlight on, no vehicle height change → change and hold vehicle height for 3 seconds or more
(B78) No. 10 - - -
(B78) No. 11 ← → Chassis ground LH headlight malfunction signal Always 1 MΩ or more
(B78) No. 12 ← → Chassis ground RH headlight malfunction signal Always 1 MΩ or more
(B78) No. 13 ← → Chassis ground SRH signal (LIN)(1) Always 1 MΩ or more
(B78) No. 14 ← → Chassis ground SRH GND(1) Always Less than 1 Ω
(B78) No. 15 ← → Chassis ground CAN-H Always 1 MΩ or more
(B78) No. 16 ← → Chassis ground CAN-L Always 1 MΩ or more
(1) Vehicle equipped with SRH