LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Switches and Harness >> Installation >> View Button

View Button

  1. Install the switch assembly VIEW.
  2. Install the cover assembly front. Refer to EXTERIOR/INTERIOR TRIM>Console Box>INSTALLATION .
  3. Install the grip and boot. Refer to CONTROL SYSTEMS>Select Lever>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: After connecting the ground terminal to the battery sensor, place the select lever in the "P" position.
scientia non olet · About LEMON Manuals