DTC P2750: Intermediate Shaft Speed Sensor "C" Circuit Range/Performance: Notes

1. -

DTC detecting condition:

Immediately at fault recognition

Trouble symptom:

Shifting shock is felt.
Acceleration is poor during standing start.
Shift control malfunction

CAUTION: After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Refer to TRANSMISSION (DIAGNOSTICS)>Basic Diagnostic Procedure .

CHECK DTC .
Read the DTC of [Transmission] using the Subaru Select Monitor. Refer to TRANSMISSION (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .

Besides DTC P2750, is any of the DTC P2751, U0122 or U0416 displayed?

Yes : Perform the diagnosis according to DTCs other than P2750. Refer to TRANSMISSION (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .

No : Perform the diagnosis according to DTC P2751. Refer to TRANSMISSION (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC P2751 INTERMEDIATE SHAFT SPEED SENSOR "C" CIRCUIT NO SIGNAL .