LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Reverse Automatic Braking System (Service Information) >> Reverse Automatic Braking Control Module >> Installation

Reverse Automatic Braking Control Module: Installation

  1. Install the sonar Control Module assembly.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the sonar Control Module bracket.
    CAUTION: Make sure the connector and harness clip are connected securely.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals