LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Legacy Limited XT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (2.4L) >> Camshaft Position Sensor >> Removal >> Exhaust >> LH Side

LH Side

  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle.
  3. Remove the under cover front. Refer to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL
  4. Disconnect the connector (A) and remove the camshaft position sensor.
    G13198287Courtesy of SUBARU OF AMERICA, INC.