LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Legacy Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Keyless Access Control Module >> Installation

Keyless Access Control Module: Installation

CAUTION: When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type H" described in appropriate service information.
  1. Install the keyless access Control Module.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the reinforcement meter.
  3. Install the combination meter assembly. Refer to INSTRUMENTATION/DRIVER INFO>Combination Meter>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals