LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Legacy Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks (Service Information) >> Keyless Entry Control Module >> Removal >> Sedan Model

Sedan Model

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel assembly rear shelf. Refer to EXTERIOR/INTERIOR TRIM>Rear Shelf Trim>REMOVAL
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the keyless entry control module.
      G13625759Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals