LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Forester Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Parking Pawl >> Installation

Parking Pawl: Installation

  1. Confirm that the inhibitor switch is in the "N range".
  2. Install the parking pawl shaft (A), return spring (B) and parking pawl (C).
    NOTE: Make sure that the end of return spring sticks out of parking pawl as shown in (a). Make sure that the other end contacts the rib of transmission case as shown in (b).
    G13225833Courtesy of SUBARU OF AMERICA, INC.
  3. Install the extension case. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>EXTENSION CASE>INSTALLATION .
  4. Install the electric oil pump. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>ELECTRIC FLUID PUMP>INSTALLATION .
  5. Install the transmission body. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals