Solenoid Unit

Remove the select lever. Refer to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
Remove the spacer and gasket. Refer to CONTROL SYSTEMS>SELECT LEVER>DISASSEMBLY>SELECT LEVER .
Remove the connector.

Courtesy of SUBARU OF AMERICA, INC.
Raise the claw with a flat tip screwdriver, etc. and remove the solenoid unit.

Courtesy of SUBARU OF AMERICA, INC.

Pull out the terminal of the solenoid unit using KTC connector terminal tool (part number: ECC-1T).

NOTE: A flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less can also be used.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Wiring color
3	Blue
4	Black