LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Starting System & Charging System >> Auto Start Stop DC/DC Converter >> Removal >> Auto Start Stop DC/DC Converter 1 >> • Model With Power Amplifier

• Model With Power Amplifier

  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector from the Auto Start Stop DC/DC converter 1 and Auto Start Stop DC/DC converter 2, and remove the clips.
    G13224916Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the Auto Start Stop DC/DC converter 1 and Auto Start Stop DC/DC converter 2 from the vehicle.
    G13224917Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the Auto Start Stop DC/DC converter 1 from the bracket.
    G13591267Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals