LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Rear Seat >> Installation

Rear Seat: Installation

  1. Install the backrest assembly RH and LH.

    Tightening torque: 

    Refer to SEATS>GENERAL DESCRIPTION>COMPONENT>REAR SEAT .

    NOTE:
    • After installing the backrest assembly, make sure that each seat belt operates normally.
    • Make sure that they are properly secured on each hook on the vehicle side.
  2. Install the rear seat cushion assembly.
    CAUTION:
    • For models with the seat heater, connect the connectors securely.
    • Check routing of each buckle and reclining strap of the seat belt.
  3. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals