LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Rear Seat Reclining System >> Removal

Rear Seat Reclining System: Removal

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the rear seat. Refer to SEATS>REAR SEAT>REMOVAL .
  3. Remove the trim panel assembly apron. Refer to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>REMOVAL .
  4. Remove the bolts, and then remove the striker backrest rear.
    1. Remove the clamp, and then remove the reclining strap holder.
    2. Remove the bolts, and then remove the striker backrest rear.
    G13226850Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the stay rear floor.
    1. Remove the harness clamp.
    2. Remove the bolts, and then remove the spring BRKT.
    3. Remove the nuts and bolts, and remove the stay rear floor.
G13226851Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals