LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle System (Diagnostics) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0716: Input/Turbine Shaft Speed Sensor "A" Circuit Range/Performance >> Notes

DTC P0716: Input/Turbine Shaft Speed Sensor "A" Circuit Range/Performance: Notes

  1. - 

    DTC detecting condition: 

    Immediately at fault recognition

    Trouble symptom: 

    • No lock-up occurs.
    • Shock occurs when selecting shift position.
    • Shift control malfunction
CAUTION: After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to TRANSMISSION (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
  1. CHECK DTC. 

    Read the DTC using Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

    Besides DTC P0716, is DTC U0122 or U0416 displayed?

    Yes:  Perform the diagnosis according to DTCs other than P0716. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .

    No:  Perform the diagnosis according to DTC P0717. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P0717 INPUT/TURBINE SHAFT SPEED SENSOR "A" CIRCUIT NO SIGNAL .

scientia non olet · About LEMON Manuals