LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Transmission Control System >> AT Shift Lock Solenoid And "P" Range Switch >> Installation >> Solenoid Unit

Solenoid Unit

  1. Clean all the parts before assembly.
  2. Insert the solenoid unit terminals to the harness connector.
    G13602920Courtesy of SUBARU OF AMERICA, INC.
  3. Install the solenoid unit.
  4. Install the harness connector to the plate COMPL.
  5. Install the spacer plate and the gasket. Refer to CONTROL SYSTEMS>SELECT LEVER>ASSEMBLY .
  6. Install the select lever. Refer to CONTROL SYSTEMS>SELECT LEVER>INSTALLATION .
scientia non olet · About LEMON Manuals