LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Starting System & Charging System (Except For HEV) >> Battery Sensor >> Removal

Battery Sensor: Removal

  1. Disconnect the connector and ground terminal.
    G11253760Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the 12V engine restart battery sensor.
CAUTION: The end of the bolt (a) of the battery sensor is crimped. Therefore, do not loosen the nut (b) to the crimped portion.
G13230760Courtesy of SUBARU OF AMERICA, INC.
G11253761Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals