LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Power Steering System (Diagnostics) >> Power Steering System >> Checking/Clearing Diagnostic Codes

Checking/Clearing Diagnostic Codes

  1. Reading the diagnosis codes
    1. Turn the ignition switch to OFF.
    2. Connect the SSM4 to the DLC3 connector.
    3. Turn the ignition switch to ON.
    4. Follow the SSM4 display screen to read the diagnosis codes.
      CAUTION: If an error is detected, recheck diagnosis codes after the issue is resolved and confirm that no error code is output.
  2. Deletion of recorded diagnosis codes
    1. Turn the ignition switch to OFF.
    2. Connect the SSM4 to the DLC3.
    3. Turn the ignition switch to ON.
    4. Follow the SSM4 display screen to delete the diagnosis codes.
scientia non olet · About LEMON Manuals