Pre-Delivery Inspection (PDI) Procedure: Notes

Perform the procedures indicated in the table below.

Item	Check point
1. Appearance	If the vehicle is covered with protective coating, visually check the vehicle body for damage and dents. If the protective coating has been removed, visually check the painted body surfaces in detail for damage or rust. Visually check the glass and light lenses for any damage, cracks or excessive gaps between body sheet metal. Visually check the plated parts for any damage. Check the instrument panel, console and trim for stains or dirt.
2. Tire	Check the tires for damage, defective, and dents on wheels. Check the tire air pressure.
3. Fuse installation	If the vehicle is about to be delivered to customer, attach a delivery mode fuse to the back-up fuse holder.
4. Door lock/unlock and open/close operations	Using the key, check the door can be locked or unlocked normally. Open and close all doors to check that there are no problems. Operate the power door lock switch to check that all doors and the rear gate lock and unlock normally.
5. Child safety lock	Check the child safety lock system operates normally.
6. Rear gate lock/unlock and open/close operation	Check if the rear gate can be unlocked normally through the emergency hole. Open and close the rear gate to check that there are no problems. Operate the power door lock switch to check that all doors and the rear gate lock and unlock normally.
7. Power rear gate	Check if the power rear gate operates normally.
8. Fuel lid lock/unlock and open/close operation	Check the fuel lid can be locked or unlocked normally. With unlock condition, check the fuel lid can be opened normally. Check the fuel lid can be unlocked normally by using an emergency release cable.
9. Accessory	Check that the following accessories are equipped. Owner's manual Warranty booklet Maintenance note Spare key Key No. plate Jack Tool set Spare tire Towing hook (eyebolt)
10. Front hood lock release	Operate the front hood lock release lever to check that the panel COMPL front hood opens normally.
11. Battery	Check the battery for any abnormal conditions such as rust or traces of battery fluid leaks.
12. Brake fluid	Check the brake fluid amount.
13. Engine oil	Check the engine oil amount.
14. CVTF	Check for leakage of CVTF.
15. CVT front differential gear oil	Check for leakage of CVT front differential gear oil.
16. Rear differential gear oil	Check for leakage of gear oil from the rear differential.
17. Engine coolant	Check the engine coolant level.
18. Window washer fluid	Check the window washer fluid amount.
19. Front hood latch	Check that the panel COMPL front hood is closed normally and locked securely.
20. Keyless entry system	Check that the keyless entry system operates normally.
21. Keyless access system	Check that the keyless access system operates normally.
22. Alarm system	Check that the alarm system operates normally.
23. Seat	Check the seat surfaces for stains or dirt. Check the seat installation conditions and functionality.
24. Seat belt	Check the seat belt installation conditions and functionality. Check the seat belt warning system operates normally.
25. TPMS (U.S. model)	If the display of TPMS warning light does not operate normally, perform the diagnosis by referring to TPMS (Diagnosis).
26. Grommet installation	Install the grommet stored in the glove box to the tie-down hole.

Item	Check point
27. Delivery (test) mode	Turn the ignition switch to ON and check that the malfunction indicator light starts blinking.
Item	Check point
28. Immobilizer system	Check that the engine starts with all keys that are equipped on vehicle. Check that the security indicator light operates normally.
29. Push button start	Using the access key that is equipped on vehicle, operate the push button start function to check engine start and stop operations.
30. Starting condition	Start the engine and check that the engine starts smoothly.
31. Exhaust system	Check that the exhaust noise is normal and no leaks are found.
32. Indicator and warning lights	Check that all indicator lights and warning lights are operating correctly.
33. Heater & ventilation	Check that the heater & ventilation system operates normally.
34. Air conditioner	Check that the air conditioner operates normally.
35. Multi-function display (MFD)	Check that the Multi-Function Display (MFD) function operates normally.
36. Audio	Check the radio and AUX operate normally.
37. Navigation	Check the navigation and AUX operate normally.
38. Telematics system	Check that the indicator light on the stereo camera cover assembly goes off. Perform the Bluetooth connection procedure between head unit (without navigation) and smartphone.
39. Accessory power supply socket	Check that the accessory power supply socket operates normally.
40. Lighting system	Check that the lighting system operates normally.
41. Illumination control	Check that the illumination control operates normally.
42. Window washer system	Check that the window washer system operates normally.
43. Wiper system	Check that the wiper system operates normally.
44. Wiper deicer	Check that the wiper deicer operates normally.
45. Power window	Check that the power window operates normally.
46. Sunroof	Check that the sunroof operates normally.
47. Rear defogger system	Check that the rear defogger system operates normally.
48. Door mirror	Check that the remote control mirror and heated mirror operate normally.
49. Room mirror	Check that the automatic anti-glare function operates normally.
50. Smart rearview mirror	Check if the display mode operates normally.
51. Steering heater	Check that the steering heater operates normally.
52. Blind Spot Detection/Rear Cross Traffic Alert (BSD/RCTA)	Press the BSD/RCTA OFF switch several times to check that the system is activated and deactivated correctly. Check the bumper face rear around the sensor for dirt, scratch, affixed stickers and poor paint coating.
53. Reverse Automatic Braking (RAB)	Check that the RAB system is activated and deactivated correctly. Check the sonar sensor installed on the bumper face rear for parts missing, dirt, scratch, foreign objects, etc.
54. Diagnostic trouble code (DTC) check	Check that the diagnostic trouble code (DTC) is not detected.
55. Eyesight assist monitor	Check that the Eyesight assist monitor operates normally.
56. Auto vehicle hold (AVH) system	Check that the AVH system is activated and deactivated correctly.
57. Front view monitor	Check that the front view monitor operates normally.

Item	Check point
58. Brake test	Check the foot brake for normal operations.
59. Parking brake	Check that the parking brake operates normally.
60. Shift control	Check that the shift patterns are correct.
61. Subaru Eyesight	Check that the Subaru Eyesight operates normally.

Item	Check point
62. Power steering system (electric power steering model)	Check the steering warning light operation.
63. Fluid leakage	Check for fluid/oil leaks.
64. Water leak test	Spray the vehicle with water and check for water leaks.
65. Appearance 2	Remove the protective coating (if equipped). Check the body paints for damage and stain. Check the plated parts for damage and rust.