LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Engine Oil Cooler >> Installation >> Front Engine Oil Cooler Pipe

Front Engine Oil Cooler Pipe

  1. Connect the water hose to the front engine oil cooler pipe.
  2. Install the front engine oil cooler pipe.
    1. Install the front engine oil cooler pipe together with the water hose.

      Tightening torque: 

      6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

    2. Connect the connector (D) of oil pressure switch and the connector (E) of engine oil temperature sensor.
    3. Install the clip (B) and clip (C), and connect the connector (A) of oil level switch harness.
    G00596964Courtesy of SUBARU OF AMERICA, INC.
  3. Install the center exhaust pipe (front), Ref. to EXHAUST (H4DOTC)>CENTER EXHAUST PIPE>INSTALLATION>CENTER EXHAUST PIPE (FRONT) .
  4. Install the reservoir tank, Ref. to COOLING (H4DOTC)>RESERVOIR TANK>INSTALLATION .
  5. Connect the ground cable to battery, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  6. Fill engine coolant, Ref. to COOLING (H4DOTC)>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .
scientia non olet · About LEMON Manuals