LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Horn >> Installation

Horn System: Horn: Installation

  1. Install the horn assembly.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

  2. Install the front bumper. Ref. to EXTERIOR/INTERIOR TRIM>FRONT BUMPER>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY>GROUND TERMINAL REMOVAL OR INSTALLATION .
scientia non olet · About LEMON Manuals