Zone Setting
- TYPE WITHOUT SMART REARVIEW MONITOR CAMERA.
- Refer to the compass zone map to check the zone number of area you use the vehicle.
Compass zone map.
- Turn the ignition switch to ON.
- Press and hold the power supply switch (a) for 6 seconds. Once zone setting mode starts, the zone number that is already set is displayed on the screen (b).
- Push the power supply switch repeatedly until the zone number you want to set is displayed.NOTE: If the multi-function button is left undone, the zone setting mode is completed.
- Refer to the compass zone map to check the zone number of area you use the vehicle.
- TYPE WITH SMART REARVIEW MONITOR CAMERA.
- Refer to the compass zone map to check the zone number of area you use the vehicle.
Compass zone map.
- Turn the ignition switch to ON.
- Operate the center button (a), and use the left button (b) to select the compass zone selection. Once zone setting mode starts, the zone number that is already set is displayed on the screen.
- Push the center button (a) repeatedly until the zone number you want to set is displayed, and confirm with the left button (b).
- Refer to the compass zone map to check the zone number of area you use the vehicle.