LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Power Window Control Switch >> Inspection >> Other Than Base Grade >> Rear Sub Switch

Rear Sub Switch

  1. Measure the resistance between terminals of the switch assembly power window rear sub.

    Preparation tool: 

    Circuit tester

    G12398775Courtesy of SUBARU OF AMERICA, INC.
    • Rear seat sub
      Terminal No. Inspection conditions Standard
      5 - 6
      6 - 7      		 OFF Less than 1 Ω
      2 - 5
      2 - 6
      2 - 7      		 1 MΩ or more
      2 - 6
      5 - 7      		 Manual UP Less than 1 Ω
      2 - 5
      6 - 7      		 1 MΩ or more
      2 - 5
      6 - 7      		 Manual DOWN Less than 1 Ω
      2 - 6
      5 - 7      		 1 MΩ or more
  2. If the inspection result is not within the standard, replace the switch assembly power window rear sub.
scientia non olet · About LEMON Manuals