LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Rear Combination Light Assembly >> Installation

Rear Combination Light Assembly: Installation

  1. Install the cord assembly.
  2. Install the light assembly combination rear.

    Tightening torque: 

    7.5N.m (0.8kgf-m, 5.5ft-lb)

  3. Install the cover assembly rear combination light.
  4. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals