LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> SUBARU Eyesight System (Driver Assist) (Diagnostics) >> Control Module I/O Signal >> Electrical Specification

Electrical Specification

G10273338Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard
(R137) No. 1 ↔ Chassis ground Local CAN-H (RAB communication line) Always 1 kΩ or more
(R137) No. 2 ↔ Chassis ground Local CAN-L (RAB communication line) Always 1 kΩ or more
(R137) No. 3 - - -
(R137) No. 4 - - -
(R137) No. 5 - - -
(R137) No. 6 ↔ Chassis ground Ignition power supply Ignition switch OFF → ON Less than 1 V → 9 - 16 V
(R137) No. 7 ↔ Chassis ground GND Always Less than 1 Ω
(R137) No. 8 ↔ Chassis ground Battery power supply Always 9 - 16 V
(R137) No. 9 ↔ Chassis ground Main CAN-L Always 1 kΩ or more
(R137) No. 10 ↔ Chassis ground Main CAN-H Always 1 kΩ or more
(R137) No. 11 - - -
(R137) No. 12 ↔ Chassis ground Pre-collision brake OFF switch input Pre-collision brake OFF switch OFF → ON Approx. 1 kΩ or more → less than 1 Ω
(R137) No. 13 ↔ Chassis ground Lane departure warning OFF switch input Lane departure warning OFF switch OFF → ON Approx. 1 kΩ or more → less than 1 Ω
(R137) No. 14 ↔ (R137) No. 15 EyeSight steering switch input ALL OFF (no switch operation) 3.6 V - 4.5 V
ALL OFF → CRUISE ON 0.0 V - 0.5 V
ALL OFF → lane keep switch ON 1.6 V - 2.5 V
ALL OFF → RES/+ ON 3.6 V - 4.5 V
ALL OFF → bumper-to bumper distance (+) ON 3.6 V - 4.5 V
ALL OFF → SET/- ON 3.6 V - 4.5 V
ALL OFF → bumper-to bumper distance (-) ON 3.6 V - 4.5 V
(R137) No. 15 ↔ Chassis ground EyeSight steering switch GND Always Less than 1 Ω
(R137) No. 16 ↔ (R137) No. 15 EyeSight steering switch input ALL OFF (no switch operation) 3.6 V - 4.5 V
ALL OFF → CRUISE ON 3.6 V - 4.5 V
ALL OFF → lane keep switch ON 3.6 V - 4.5 V
ALL OFF → RES/+ ON 2.6 V - 3.5 V
ALL OFF → bumper-to bumper distance (+) ON 1.6 V - 2.5 V
ALL OFF → SET/- ON 0.6 V - 1.5 V
ALL OFF → bumper-to bumper distance (-) ON 0.0 V - 0.5 V