LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (Except For STI)) >> Manifold Absolute Pressure and Intake Air Temperature Sensor >> Removal

Manifold Absolute Pressure and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>COLLECTOR COVER>REMOVAL .
  2. Disconnect the ground terminal from battery sensor. Refer to NOTE>NOTE>BATTERY .
  3. Disconnect the connector (A) from the manifold absolute pressure & intake air temperature sensor, and remove the manifold absolute pressure & intake air temperature sensor from the intake manifold.
    G10266236Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals