LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Immobilizer Antenna >> Removal >> Model Without Keyless Access With Push Button Start

Model Without Keyless Access With Push Button Start

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.

    Refer to NOTE>NOTE>BATTERY .

    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the cover assembly - column.
    1. Release the clips, and remove the cover assembly - steering UPR.
      G10269892Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the screws by turning the steering wheel to right and left.
    3. Release the claw, and remove the cover assembly - column UPR and the cover assembly - column LWR.
      G08316422Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the immobilizer antenna assembly.
    1. Disconnect the connector.
    2. Release two claws using a flat tip screwdriver or similar tool wrapped with a protection tape, and remove the immobilizer antenna assembly.
      CAUTION: Do not apply excessive force to disengage the lock of immobilizer antenna assembly. Otherwise they may be broken because those parts are the products made of a plastic.
      G09489442Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals