Reduction Driven Gear: Adjustment
- Measure clearance "A" between snap ring and transmission case.
Specification:
0.05 - 0.25 mm (0.002 - 0.01 in)
- If clearance "A" is out of standard, select the snap ring within standard.
Snap ring Part No. Thickness mm (in) 805100460 2.0 (0.079) 805100461 2.1 (0.083) 805100462 2.2 (0.087) 805100463 2.3 (0.091) 805100464 2.4 (0.094)