LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Transmission Harness >> Inspection

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and oil temperature sensor.
    NOTE: Refer to WIRING INSTRUCTIONS for transmission harness terminal and oil temperature sensor terminal. Refer to WIRING SYSTEM>CVT CONTROL SYSTEM>WIRING DIAGRAM .

    Harness continuity standard 

    Less than 1 Ω

    Oil temperature sensor standard 

    Approx. 2.6 kΩ (at 20°C)

scientia non olet · About LEMON Manuals