LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control Systems >> AT Shift Lock Solenoid And "P" Range Switch >> Removal >> Solenoid Unit

Solenoid Unit

  1. Remove the AT select lever. Refer to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
  2. Remove the spacer and gasket. Refer to CONTROL SYSTEMS>SELECT LEVER>DISASSEMBLY .
  3. Using a flat tip screwdriver with a thin tip, remove the harness connector.
    G06651727Courtesy of SUBARU OF AMERICA, INC.
  4. Raise the claw with a flat tip screwdriver with a thin tip and remove the solenoid unit.
    G06651764Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the terminal of the solenoid unit using a flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less, KTC connector terminal tool ECC-1T or equivalent.
    G13260507Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals