Side Airbag Sensor: Installation

Before installation, inspect the following items and replace any faulty part with a new part.
- The side airbag sensor, sensor bracket, or connector are damaged.
- Side airbag module has been activated.
Install the side airbag sensor.
CAUTION: Do not reuse the bolt and nut.

CAUTION: Always replace with the specified new bolts and nuts.

Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the seat belt retractor.
Tightening torque:

Front seat belt: Refer to SEAT BELT SYSTEM>GENERAL DESCRIPTION>COMPONENT>FRONT SEAT BELT .
Install the cover side sill - front INN, cover side sill - rear INN, and trim panel - center pillar LWR.
NOTE: Assemble the trim panel - center pillar LWR to the trim panel - center pillar UPR securely.

Courtesy of SUBARU OF AMERICA, INC.
Connect the battery ground terminal. Refer to NOTE>NOTE>BATTERY .