LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Front Door Impact Sensor >> Installation

Front Door Impact Sensor: Installation

  1. Before installation, inspect the following items and replace any faulty part with a new part.
    • The front door impact sensor or connector is damaged.
    • Inner panel area of the panel assembly - front door is deformed.
    • Side airbag module has been activated.
  2. Install the front door impact sensor.
    CAUTION: Do not reuse the bolt and nut.
    CAUTION: Always replace with the specified new bolts and nuts.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the plate - door.
  4. Install the sealing cover.
  5. Install the trim panel - front door.
  6. Connect the battery ground terminal. Refer to NOTE>NOTE>BATTERY .
scientia non olet · About LEMON Manuals