LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (STI)) >> Electronic Throttle Control Relay >> Removal

Electronic Throttle Control Relay: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. Refer to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the bolts and nuts securing the fuse block and move down the fuse block.
    G10264886Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the electronic throttle control relay from the relay block.
G10264891Courtesy of SUBARU OF AMERICA, INC.