LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Manual Transaxle & Differential (TY856)) >> Front Differential Assembly >> Assembly >> Differential Case

Differential Case

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, attach the RH and LH taper roller bearing inner races to the differential case.
    ST1 398437700 INSTALLER
    ST2 398497701 SEAT
    CAUTION: Do not apply pressure in excess of 20 kN (2.0 ton, 2.2 US ton, 2.0 Imp ton).
    NOTE: Always replace the taper roller bearing inner race and outer race as a set.
    G10294279Courtesy of SUBARU OF AMERICA, INC.
  2. Install the hypoid driven gear to differential case.
    ST 18270KA020 SOCKET (E20)

    Tightening torque: 

    69 N.m (7.0 kgf-m, 50.9 ft-lb)

scientia non olet · About LEMON Manuals