LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Speed Control System (STI)) >> Accelerator Pedal >> Inspection >> Check Accelerator Pedal Sensor Area (Method With Subaru Select Monitor)

Check Accelerator Pedal Sensor Area (Method With Subaru Select Monitor)

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to ON. (Engine OFF)
  2. Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. Refer to ENGINE (DIAGNOSTICS) (STI)>SUBARU SELECT MONITOR>OPERATION>DISPLAY CURRENT ENGINE DATA (NORMAL MODE) .
Accelerator pedal sensor Accelerator pedal opening angle signal Standard
Main 0.0% 0.4 - 1.0 V
100.0% 2.4 - 3.7 V
Sub 0.0% 0.3 - 1.1 V
100.0% 2.3 - 3.8 V
scientia non olet · About LEMON Manuals