LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Cooling System (STI)) >> Engine Coolant >> Inspection

Engine Coolant: Inspection

WARNING: This page is about a different variant/trim than selected.
NOTE: When adding the engine coolant, always use SUBARU Super Coolant.
  1. Park the vehicle on a level surface.
  2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant.
    1. Make sure the engine coolant level in the reservoir tank is between "FULL" and "LOW" with the engine in a cold condition.
    2. Open the cap of coolant filler tank, and check that the engine coolant is filled up to the filler neck position.
scientia non olet · About LEMON Manuals