LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System (Except For STI) >> Engine Oil Cooler >> Removal

Engine Oil Cooler: Removal

CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Remove the collector cover. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>COLLECTOR COVER>REMOVAL
  2. Drain engine coolant. Refer to COOLING (EXCEPT FOR STI)>ENGINE COOLANT
  3. Lower the vehicle.
  4. Remove the engine oil filter. Refer to LUBRICATION (EXCEPT FOR STI)>ENGINE OIL FILTER>REMOVAL .
  5. Disconnect the front engine oil cooler hose A (A) and the side engine oil cooler hose A (B) from the engine oil cooler.
    G10267316Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the oil cooler connector and remove the engine oil cooler.
    G09476561Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals