LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation System & Driver Information Center >> Combination Meter >> Removal

Combination Meter: Removal

  1. Disconnect the ground cable from battery. Refer to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Release the lock, tilt the steering column to the lowest end and fully extend the column by the telescopic system.
  3. Release the screws, clips and claws, and remove the visor - combination meter.
    G10270894Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the combination meter assembly.
    CAUTION:
    • Be careful not to damage the meter or instrument panel.
    • Pay particular attention to avoid damaging the meter glass.
    1. Remove the screws.
      G10270895Courtesy of SUBARU OF AMERICA, INC.
    2. Pull the combination meter assembly toward you and disconnect the connector.
      G06653763Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals