STI Model

NOTE: Before installation, remove mud and foreign matter from the disc brake assembly.

Check the rear disc rotor. Refer to BRAKE>REAR DISC ROTOR>INSPECTION .
Install the disc rotor.
NOTE: When installing the rear disc rotor, match the alignment mark (a) of the rear disc rotor and the alignment mark (b) of the bolt - hub.
Adjust the parking brake. Refer to PARKING BRAKE>PARKING BRAKE ASSEMBLY (REAR DISC BRAKE)>ADJUSTMENT .
Install the disc brake assembly.
Tightening torque:

Mounting bolt: 73 N.m (7.4 kgf-m, 53.8 ft-lb)

Brake hose bracket: 33 N.m (3.4 kgf-m, 24.3 ft-lb)
Install the rear wheels.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)