Symptom Chart

Symptoms	Repair order	Reference
The door lock control system does not operate.	1. Remove and visually inspect the following fuses. No. 3 (in fuse & relay box) No. 7 (in fuse & relay box) No. 8 (in main fuse box) (model without keyless access with push button start only)	If the fuse is blown out, replace the fuse with a new part. When there is no defective with the fuse, check the power supply and ground circuit. Refer to SECURITY AND LOCKS>DOOR LOCK CONTROL SYSTEM>INSPECTION>CHECK POWER SUPPLY AND GROUND CIRCUIT .
	2. Check the power supply and ground circuit for body integrated unit.	Refer to SECURITY AND LOCKS>DOOR LOCK CONTROL SYSTEM>INSPECTION>CHECK POWER SUPPLY AND GROUND CIRCUIT .
	3. Check the door lock switch and the circuit.	Refer to SECURITY AND LOCKS>DOOR LOCK CONTROL SYSTEM>INSPECTION>CHECK DOOR LOCK SWITCH .
	4. Check the trunk opener switch and the circuit.	Refer to SECURITY AND LOCKS>DOOR LOCK CONTROL SYSTEM>INSPECTION>CHECK TRUNK OPENER SWITCH CIRCUIT .
	5. Check the door lock actuator and the circuit.	Refer to SECURITY AND LOCKS>DOOR LOCK CONTROL SYSTEM>INSPECTION>CHECK DOOR LOCK ACTUATOR AND CIRCUIT .
A specific door lock actuator does not operate.	Check the door lock actuator and circuit.	Refer to SECURITY AND LOCKS>DOOR LOCK CONTROL SYSTEM>INSPECTION>CHECK DOOR LOCK ACTUATOR AND CIRCUIT .