Real-Time Diagnosis: Operation

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System».
On «Select System» display, select «Engine Control System» and then «Enter».
On «Select Function» display, select «Data Monitor».
Make sure that normal display is shown when operated as follows:
- Depress and release the brake pedal. (Stop light switch and brake switch are turned ON.)
- Turn the "CRUISE" switch to ON.
- Turn the "CANCEL" switch to ON.
- Turn the "SET/-" switch to ON.
- Turn the "RES/+" switch to ON.
- Depress or release the clutch switch.
- Place the shift lever in any position other than neutral.
  NOTE: For detailed operation procedures, refer to "Application help".