DTC P1C00: Battery Monitor Module "A" Performance: Notes

DTC detecting condition:

Immediately at fault recognition

CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>CLEAR MEMORY MODE>OPERATION , and Inspection Mode Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>INSPECTION MODE>PROCEDURE ..

CHECK DTC.
Read DTC using the Subaru Select Monitor or a general scan tool. Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>READ DIAGNOSTIC TROUBLE CODE (DTC) .

Is DTC P1C00 displayed? (Current malfunction)

Yes: Replace the battery sensor. Refer to STARTING/CHARGING SYSTEMS (EXCEPT FOR STI)>BATTERY SENSOR .

No: Even if DTC is detected, it has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.